OceanStrut Marine Aluminium Models  Three designs have been completed a low profile compact combo, standard dual combo and a 6" Mount.. These models are suitable for the latest boats featuring a sliding sunroof where roof space is at a premium.
The Compact Combo at left is designed to fit the latest radars, including broadband models. Designed into the front radar mount is a 4 degree tilt forward so no wedges are required. The Satellite Mount is designed to fit O32, O37M, O45M, and O60m antennas with enclosed wiring. As can be seen by the compact design, it is suitable for both hardtop and Targa bar mounting where room is at a premium. Even the smallest Targa bar, can now be adapted to have both a 18"/24" Radar and Satellite Antenna mounted on the centreline of the vessel. The Standard Combo at right has been designed to lift the radar and Satellite Antenna higher and is ideal for larger boats. The design of both combo mounts does away with the need to mount a dummy dome when the Radar is mounted on the centre line of the boat and the Satellite Dome is mounted to one side. As with all Ocean TV products the standard of finish and workmanship is excellent. All combo mounts are manufactured at our production facility in the USA, from special Marine Aluminium, with all holes predrilled, primed with a thin Zinc Primer to seal the Aluminium from corrosion, and finally finished in a glossy white polyester powder coating.  All mounts have an adapter plate supplied for either a Ocean TV O32, O37M, O45M or O60M at the time of shipment.
The photo at left shows the exclusive adapter plate, designed to fit Ocean TV Antennas. Adapter plates are available for the complete range of antennas, the correct plate is supplied with the antenna when ordering. As all holes are predrilled, installation is fast and easy, and corrosion is not a problem as all holes are primed and powder coated. 
The latest addition to the OceanStrut is the 6". Sloped aft the mount features the same exclusive adapter plates, and is ideal when an antenna needs to be lifted slightly higher or when the foot print of the Antenna is too big for the mounting location. Shown at left with the optional Hinged adapter, the foot print of the antenna is reduced to 200mm square, making it possible to mount in the smallest area. Combo Mounts are priced at under $1000.00 and 6" Mounts under $400.00. | 
To the left is the first production run of the Stainless Steel Range of OceanStrut Radar and Satellite Mounts at our production facility in Asia.
